Smart AMP

Frequency Response: 20Hz-20kHz +1/-5 dB.

S/N Ratio, Dynamic Range: 75dB (compressor bypassed), 82dB (compressor enabled).

Audio Input (Line In): -13dBm to +8dBm(170mV to 2.0V RMS), single ended or differential.

User Controls: Input, minimum, and master volumes; RUN/TEST mode, sensor sensitivity, switchable input compressor, AUTO SETUP.

Indicators: Input and Sensor VU’s, RUN/TEST status, main and sensor POWER status.

Audio Sensor: Condenser type, includes line drive amplifier and feedback suppression filters.

Acoustic Mapping: full scale sweep response performed during AUTO SETUP, 8 bit microprocessor, flash storage, self test routines.

Audio Output: 6 watts @4 ohms, 2 to 8 ohm nominal, overload protected, includes line out.

Output Attenuation: -32dB max, adjustable, at both speaker and line outputs.

Connections: Line in, line out, speaker out, power and ext. sensor (via 4 pin ejection header).

Output Tracking: 10ms attack resp., linear tracking, max 32dB atten., max decay = -2dB/s.

Power Consumption: 500 mA @12 VDC (typical, average).

Construction Standard: Industrial/Commercial, carbon steel enclosure, polyester powdercoat.

Operating Temp: -20°F to +130°F (-30°C to +55°C).

Dimensions, Weight: 3.5”w x6.0”d x0.9h, 1.5lb (8.9w x15.2d x2.3h cm, 0.7kg).

Warranty: 5 year Gold Seal.

Warranty Includes: 12VDC power supply, Audio Sensor w/ mounting hardware, audio patch cords and connectors.